Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: oldturkey03

Düzenleme onaylandı tarafından oldturkey03

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] LCD is now removed from the frame.
[* blue] The PCB for the buttons is glued to the bottom of the LCD. Remove it slowly and carefully. An opening tool will make it easier.
[* red] There will be enough adhesive on the button PCB to adhere it to the new LCD.
[*
black] Insert wisdom hereWith the button PCB re-adhered the new Display can now be installed. It is not necessary to use any additional glue for that.
[* black] The frame should have enough adhesive to provide a secure grip. If additional glue should be necessary, preference should be given to rubber cement. This will ensure that, should another display replacement be necessary, the glue will come off with heat again
.
[* red] LCD is now removed from the frame.
[* blue] The PCB for the buttons is glued to the bottom of the LCD. Remove it slowly and carefully. An opening tool will make it easier.
[* red] There will be enough adhesive on the button PCB to adhere it to the new LCD.
[*
black] Insert wisdom hereWith the button PCB re-adhered the new Display can now be installed. It is not necessary to use any additional glue for that.
[* black] The frame should have enough adhesive to provide a secure grip. If additional glue should be necessary, preference should be given to rubber cement. This will ensure that, should another display replacement be necessary, the glue will come off with heat again
.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Eski Sürüm

Yeni Sürüm