Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Ben Blischke —

Düzenleme onaylandı tarafından Ben Blischke

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Install the washer
-[* black] Cut the washer straight from the edge to the center hole.
-[* black] Pull-out the strap on the bottom by a few centimers on the bottom.
+[* black] Cut a straight line into the washer from the edge to the center hole. This will allow it to slide onto the strap.
+[* black] Re-insert the strap through the sole, as it should be for normal wearing. Then, pull the strap a bit further through from the bottom to give space for installing the washer.
[* black] Slide the washer between the outsole and the strap ending.
[* black] Pull the strap upwards to secure the washer.