4. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Individually pull the strings to the tuners and insert into the correct tuner. | |
| - | [* black] Turn the tuners enough to tighten the strings but DO NOT FULLY TUNE. Fully tuning the strings too quickly after install can lead to the strings snapping, which can lead to injury. |
| - | [* black] The thickest string or top string will go into the tuner closest to the neck of the guitar, and the thinnest string or bottom string will go into the furthest tuner, and the second thickest string will go into the second closest tuner and so on. |
| - | [* black] Make sure each string is slotting into the nut. The "nut" is the white piece at the end of the guitar neck, and it ensures there is zero unintentional vibration in the strings. |
| + | [* black] Turn the tuners enough to tighten the strings but DO NOT FULLY TUNE. |
| + | [* icon_caution] Fully tuning the strings too quickly after install can lead to the strings snapping, which can lead to injury. |
| + | [* icon_note] The thickest string or top string will go into the tuner closest to the neck of the guitar, and the thinnest string or bottom string will go into the furthest tuner, and the second thickest string will go into the second closest tuner and so on. |
| + | [* icon_note] Make sure each string is slotted into the nut. The "nut" is the white piece at the end of the guitar neck, and it ensures there is zero unintentional vibration in the strings. |