2. Adımdaki Değişiklikler
Düzenleyen: Alexander Collins —
Düzenleme onaylandı tarafından Alexander Collins
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Remove the 5 socket head screws on the back of belt/bearing cover. |
|---|---|
| - | [* black] Remove the cover and shift it out of the way. Ensure not to put too much tension on the wires. |
| + | [* black] Orient the printer so that the screen is facing away from you. |
| + | [* red] Remove the five 2.5mm X 10mm socket head screws on the back of the extruder assembly. |
| + | [* black] Remove the back cover and pull it away from the extruder assembly. Do not put too much tension on the wires. |