3. Adımdaki Değişiklikler
Düzenleyen: Alexander Collins —
Düzenleme onaylandı tarafından Alexander Collins
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Orient the printer so that the screen is facing you. | |
| - | [* red] Loosen the tension set screw. |
| - | [* orange] Loosen the two socket head screws on the right, holding on to the X-axis motor. |
| - | [* yellow] Slightly loosen the pivot screw on the left. This screw will act as a pivot for the X-axis motor. |
| + | [* red] Loosen the 2.5mm X 18mm tension set screw. |
| + | [* orange] Loosen the two 2.5mm X 18mm socket head screws on the right, holding on to the X-axis motor. |
| + | [* yellow] Slightly loosen the 2.5mm X 18mm pivot screw on the left. This screw will act as a pivot for the X-axis motor. |
| [* black] Pivot the motor to release the tension on the belt. |