1. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* icon_reminder] You should still be grounded. |
|---|---|
| [* black] Follow the three wires connected to the speaker to find where they connect to the circuit board. | |
| - | [* icon_caution] Though you are grounded, you should still be careful with the circuit board. Avoid touching any parts we don't tell you to. |
| - | [* black] Remove the wires from the connector pins. We recommend using tweezers to gently rock the end of the wires back and forth until they disconnect from the board. |
| - | [* icon_caution] Yanking apart the connection by the wires is an option, but could easily damage the board. Be careful with small connections like this one. |
| + | [* black] Use tweezers to gently rock the end of the wires back and forth until they disconnect from the board. |