Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi —

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Identify and locate SW2, SW3, and SW4 which are marked on the removed logic board
+[* red] Identify SW2, SW3, and SW4 which are marked on the motherboard.
[* icon_note] These switches are located in the front portion of the mouse
[* icon_caution] Always work in a well-ventilated area when soldering.
-[* black] Use a soldering iron and desoldering pump or solder wick to remove the old solder from SW2, SW3, and SW4. line.
-[* icon_caution] Take care to heat only the solder joints and avoid damaging the logic board or surrounding components.
+[* black] Use a soldering iron and desoldering pump or solder wick to remove the old solder from SW2, SW3, and SW4.
+[* icon_caution] Take care to heat only the solder joints and avoid damaging the motherboard or surrounding components.