1. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Identify SW2, SW3, and SW4 which are marked on the motherboard. | |
| [* icon_note] These switches are located in the front portion of the mouse | |
| [* icon_caution] Always work in a well-ventilated area when soldering. | |
| [* black] Use a soldering iron and desoldering pump or solder wick to remove the old solder from SW2, SW3, and SW4. | |
| [* icon_caution] Take care to heat only the solder joints and avoid damaging the motherboard or surrounding components. | |
| + | [* black] Once the solder is removed, use tweezers to carefully lift and remove the old button modules from the motherboard. |