Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

5. Adımdaki Değişiklikler

Düzenleyen: Walter Galan —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Apple sticks a small strip of clear plastic with adhesive applied to one side to the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.
[* black] Insert wisdom hereHold the end of the cable retainer down with one finger while you use the tip of a spudger to slightly lift the other end and rotate it away from the camera cable connector.
[* black] Disconnect the camera cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.
[* icon_caution] Apple sticks a small strip of clear plastic with adhesive applied to one side to the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.
[* black] Insert wisdom hereHold the end of the cable retainer down with one finger while you use the tip of a spudger to slightly lift the other end and rotate it away from the camera cable connector.
[* black] Disconnect the camera cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.

Resim 2

Silindi