Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Thomas J

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] If can't find anything suitable in the internet, I'll give you a few tips how to build a screwdriver on your own.
[* black] Use a steel rod of about 8 mm diameter. Don't use any weaker metals
[* black] Now try to mill three teeth with equivalent distanze around the boundary of one end of the rod with an angle grinder. After you made this drill a hole perpendicularly in the center of the rod.
[* black] With some talent you should now have a reasonable screwdriver for the four most terrible screws I've ever seen.

Resim 1

Önceki resim yok

Eklendi