5. Adımdaki Değişiklikler
Düzenleyen: Nick Schultz —
Düzenleme onaylandı tarafından Nick Schultz
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Lift the fingerprint reader PCB | |
| [* black] Use the flat end of a spudger to pry up and separate the adhesive holding the black fingerprint reader cable PCB to the I/O board. | |
| [* icon_caution] Do not pull on the cable or pry on the connector itself, only underneath the black PCB that the connector is on. | |
| + | [* icon_reminder] You may need to replace the adhesive holding this PCB to the I/O board if your replacement part does not include it. Tesa 61395 tape would work well for this. |