2. Adımdaki Değişiklikler
Düzenleyen: Nick Schultz —
Düzenleme onaylandı tarafından Nick Schultz
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Insert your opening pick beneath the top right corner of the screen assembly to form a gap between the assembly and the bezel. |
|---|---|
| - | [* icon_caution] Do not let your opening pick go further than the bezel clips. Once you can get your pick deeper than hitting a clip, you have unfastened that clip and should move down to the next one. Inserting the pick further risks damaging the display. |
| + | [title] Insert an opening pick |
| + | [* black] Insert the tip of an opening pick at a downward angle between the bezel and screen assembly, near the top right corner. |
| + | [* black] Lower the pick so it's flat with the screen and the tip is under the screen bezel. |