Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Nick Schultz —

Düzenleme onaylandı tarafından Nick Schultz

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert your opening pick beneath the top right corner of the screen assembly to form a gap between the assembly and the bezel.
-[* icon_caution] Do not let your opening pick go further than the bezel clips. Once you can get your pick deeper than hitting a clip, you have unfastened that clip and should move down to the next one. Inserting the pick further risks damaging the display.
+[* black] Insert the tip of an opening pick at a downward angle between the bezel and screen assembly, near the top right corner.
+[* black] Lower the pick so it's flat with the screen and the tip is under the screen bezel.