11. Adımdaki Değişiklikler
Düzenleyen: Sam Gustafson —
Düzenleme onaylandı tarafından Sam Gustafson
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Installation Notes: Front Block | |
| [* black] Cock the shutter on the camera body. The mirror box should be uncharged before installation. | |
| [* black] Twist the three motor drive wires together to easily insert them through the bottom of the camera. | |
| [* black] Carefully track wire routing during installation. Make sure nothing is getting pinched and that all wires are accessible for resoldering. | |
| + | [* black] Once the front block is in place, check the mechanical speeds of the shutter before completing the reassembly. The mirror and shutter should function normally. |