Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Spencer Pennington —

Düzenleme onaylandı tarafından Spencer Pennington

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Insert an opening pick
-[* icon_caution] The rear trim is held in place by fragile plastic clips. Work slowly and pry gently to avoid breaking the clips.
+[* icon_caution] The rear trim is held in place by fragile plastic clips. Work slowly and gently to avoid breaking the clips.
[* icon_note] If you installed the back button paddles included with your controller, remove them before beginning this process.
-[* black] Insert an opening pick between the black portion of the rear trim and the top cover on one of the grips, near the joystick lever.
-[* black] Slide the opening pick towards the bottom of the controller to release the clips.
+[* black] Insert the flat edge of an opening pick between the black portion of the rear trim and the top cover, near the joystick lever.
+[* black] Slide the opening pick towards the bottom of the grip to release the clips.