9. Adımdaki Değişiklikler
Adım Satırları
| [title] Remove Gear Ring 1 | |
| [* icon_note] Gear ring 1 refers to the upper of the two metal rings (the one closest to the rear of the lens). | |
| - | [* red] Remove the screw holding the zoom ribbon cable in place. |
| - | [* orange] Remove the |
| + | [* red] Remove the Phillips #00 screw holding the zoom ribbon cable in place. |
| + | [* orange] Remove the two JIS #000 gear limit screws. |
| [* yellow] Rotate the gear ring 1 as far counter-clockwise as you are able to. | |
| [* icon_caution] Be very careful with the zooming brush, as it is very easily damaged. Make sure it does not snag anything and that the pins do not bend! | |
| [* green] Pull the gear ring up and off of the lens. You may need to wiggle the ring slightly if it is having troubles coming off. |