1. Adımdaki Değişiklikler
Düzenleyen: Sam Gustafson —
Düzenleme onaylandı tarafından Sam Gustafson
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Remove frame counter | |
| [* red] Loosen three grub screws. Do not remove them from the frame counter cover. | |
| [* orange] Lift off frame counter cover. | |
| - | [* yellow] Remove one |
| + | [* yellow] Remove one 2.5 mm flat head screw. It is reverse or left-hand threaded. |
| [* green] Remove the frame counter dial. | |
| [* light_blue] Remove the retaining nut using a spanner wrench. A pair of fine tipped nippers can also work. | |
| + | [* icon_note] On similar cameras like the K1000, this nut is reverse threaded. There may also be some variation within Spotmatic cameras. |
| [* blue] Remove the dial seat. |