Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Sam Gustafson —

Düzenleme onaylandı tarafından Sam Gustafson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove frame counter
[* red] Loosen three grub screws. Do not remove them from the frame counter cover.
[* orange] Lift off frame counter cover.
[* yellow] Remove one 2.5 mm flat head screw. It is reverse or left-hand threaded.
[* green] Remove the frame counter dial.
[* light_blue] Remove the retaining nut using a spanner wrench. A pair of fine tipped nippers can also work.
-[* icon_note] On similar cameras like the K1000, this nut is reverse threaded. There may also be some variation within Spotmatic cameras.
+[* icon_caution] On some Spotmatics, this nut may be reverse threaded. Work carefully.
[* blue] Remove the dial seat.