Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: David Rios —

Düzenleme onaylandı tarafından David Rios

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Locate the Camera mount, this should be the connection between the camera gimbal and the drone body itself. It's located on the bottom of the drone in the center.
-[* black] Unscrew each of the 4 screws(6mm) with a Philips head screwdriver by slowly pulling back on the mount in the opposite direction.
+[* black] Use the ***J1*** Philips head screwdriver to unscrew each of the 4 screws(6mm) with a Philips head screwdriver by slowly pulling back on the mount in the opposite direction.