Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Slowly lift the camera mount from the device.
+[* black] Slowly lift the gimbal housing from the device.
[* red] Gently disconnect the camera cable from the cable connected to the motherboard.
[* black] Push on alternating sides of the connector and pull straight away from the socket.
[* icon_note] If you're having trouble, try rocking the connector side-to-side to loosen it.
[* icon_caution] Do not pull on the wire cables as this may cause damage.
-[* icon_note] The camera mount should now be disconnected from the drone.
+[* icon_note] The gimbal housing should now be disconnected from the drone.