| [* black] First method is to put a pattern disc on the table such as the showed one. There are also print templates on the web. |
---|
| [* black] These patterns on the disc interact with light. Except it doesn't work with most led light. So you need an old fashion glowing filament or fluorescent lamp because they are flickering with our power line frequnecy. |
---|
| [* black] On the pattern disc you see two main areas with thicker lines. The inner three pattern circles are for 60 Hz e.g. north america and the outer patterns are for 50Hz. |
---|
| [* black] The 3 pattern circles itself representing 3 different speeds. 33 1/3, 45 and 78 rpms. The stroboscopic effects occurs if the flickering light is directed to the pattern disc and the corresponding speed of the table makes the patter look as it stand still. So the pattern in the corresponding circle isn't moving, if the speed setup is right. |
---|