3. Adımdaki Değişiklikler
Adım Satırları
| + | [* black] Carefully lift the back cover partially off of the camera. |
|---|---|
| + | [* icon_caution] There are two ribbon cables still connecting the back cover to the camera. |
| + | [* red] Disconnect the right most ribbon cables from the main PCB board. |
| + | [* black] Use a plastic spudger to lift up the black locking tab. |
| + | [* black] Pull out the ribbon cable from its connector using a pair of angled tweezers. |
| + | [* icon_note] With this ribbon cable disconnected, you will be able to move the back cover slightly farther away from the camera, giving you more room to remove the remaining ribbon cable. |
| + | [* orange] Remove the left ribbon cable using the same two steps as with the other ribbon cable. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi