Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Rylee Hjorth

Düzenleme onaylandı tarafından Rylee Hjorth

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Using the J0 screwdriver, unscrew the two 0.3 cm screws depicted.
+[* red] Using the J0 screwdriver, unscrew the two 3 mm screws depicted.
[* icon_note] These screws will come out of the piece are very small. Be mindful when removing them so that they do not get lost.
[* orange] Remove the silver piece.
[* yellow] Align the SSD with the face-up and prongs to the right to be insert the pins to the port.