Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: oldturkey03

Düzenleme onaylandı tarafından oldturkey03

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.
[*
black] Insert wisdom herea plastic opening tool between the front and rear cases along the left edge of the controller. Rotate the tool toward the front of the controller to pry the two cases apart.
[* black] Grasp the controller by the battery compartment and the headphone jack. Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board
.
[* red] Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.
[*
black] Insert wisdom herea plastic opening tool between the front and rear cases along the left edge of the controller. Rotate the tool toward the front of the controller to pry the two cases apart.
[* black] Grasp the controller by the battery compartment and the headphone jack. Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board
.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm