Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Lift the two wires and plastic piece away from the Wi-Fi board.
-[* orange] Remove the single 3 mm screw holding the Wi-Fi board in place using a Phillips #00 screwdriver.
-[* black] Carefully pinch the sides of the Wi-Fi board to the left.
+[* orange] Remove the single 3 mm screw holding the Wi-Fi board in place using a Phillips #0 screwdriver.
+[* black] Hold the sides of the Wi-Fi board and slide it out of the socket.