4. Adımdaki Değişiklikler
Düzenleyen: Maddie McCoy —
Düzenleme onaylandı tarafından Maddie McCoy
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Separate the circuit board piece from the joystick connection. | |
| [* black] Take the joystick module itself and remove the four 8mm screws that connect the joystick to the housing. | |
| - | [* black] Unscrew the thumb stick from the module if a replacement is |
| - | [* icon_caution] ''Caution: the circuit board is wired through glue. If the plastic spudger is unable to pry the glue off, use the metal spudger as a last resort'' |
| + | [* black] Unscrew the thumb stick from the module if a replacement is not needed. |
| + | [* icon_caution] ''Caution: the circuit board is wired through glue. If the plastic spudger is unable to pry the glue off, use the metal spudger as a last resort.'' |