5. Adımdaki Değişiklikler
Düzenleyen: Ryan Barcelos —
Düzenleme onaylandı tarafından Ryan Barcelos
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] The final location that will be soldered are 4 individual wires, and be sure to take note of their exact order to ensure a proper re-connection later. | |
| - | [* icon_reminder] To solder off/on the wires, the RVC adhesive glue will need to be removed. If that is not an option, then remove the wires with the |
| + | [* icon_reminder] To solder off/on the wires, the RVC adhesive glue will need to be removed. If that is not an option, then remove the wires with the Pliers, as shown in step 2. |
| [* orange] To solder off the individual wires, hold the heated soldering iron to the metal stud connection points and gently pull each wire until they disconnect. |