| - | [* black] Flip the board that was loosened from removing the four screws and go on the opposite side of where the Regulator is located. Use a Solder to remove the Regulator from the other side of the board. |
|---|
| - | [* black] Once you have removed the faulty Regulator, replace it with the new one and solder the new Regulator on |
|---|
| + | [* red] Flip the board that was loosened from removing the four screws and go on the opposite side of where the Regulator is located. Use a Solder to remove the Regulator from the other side of the board. |
|---|
| + | [* black] Remove the faulty regulator. |
|---|
| + | [* icon_note] A new regulator will need to be soldered back on. |
|---|