Eşyalarını Tamir Et Topluluk Mağaza

5. Adımdaki Değişiklikler

Düzenleyen: Ryan Barcelos —

Düzenleme onaylandı tarafından Ryan Barcelos

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Now using the Philips #2, unscrew the two 2.5mm screws, and remove the Snap Ring by pulling up at it with Snap Ring Pliers which is being highlighted.
+[* red] Using the Philips #2, unscrew the two 2.5mm screws, and remove the Snap Ring by pulling up at it with Snap Ring Pliers which are being highlighted.
[* icon_caution] DO NOT unscrew the yellow X in the picture.
-[* orange] The Tonearm is now disconnected from the frame and we can work towards the spring by removing the small 0.1mm black screw with the Philips #000.
+[* orange] Remove the small 0.1mm black screw with the Phillips #000.