Eşyalarını Tamir Et Topluluk Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: Sam Gustafson —

Düzenleme onaylandı tarafından Sam Gustafson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove mirror damper
[* red] Remove one 2.9 mm #00 screw and screw collar.
-[* orange] Remove rubber bumper.
-[* icon_note] This rubber bumper is the primary culprit for slow mirror movement. Replacing it with a new part is recommended as it provides damping for the mirror return but it isn't required for the camera to function. A model file for 3D printing new parts can be found on the main camera page.
+[* orange] Remove rubber damper.
+[* icon_note] This rubber damper is the primary culprit for slow mirror movement. Replacing it with a new part is recommended as it provides damping for the mirror return but it isn't required for the camera to function. A model file for 3D printing new parts can be found on the main camera page.