14. Adımdaki Değişiklikler
Düzenleyen: Sam Gustafson —
Düzenleme onaylandı tarafından Sam Gustafson
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Remove mirror return stop | |
| [* red] Remove two 2.4 mm #00 screws. | |
| - | [* icon_note] The mirror return stop and mirror return lever may have rubber dampers on them that should be replaced. |
| + | [* icon_note] The mirror return stop and mirror return lever may have rubber dampers on them that should be replaced. Dampers of various thickness are provided in the model file. The stop plate position can be adjusted to fine tune the clearances in the mirror mechanism once it is fully assembled. |