1. Adımdaki Değişiklikler
Düzenleyen: Sam Gustafson —
Düzenleme onaylandı tarafından Sam Gustafson
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Clean ISO resistor | |
| [* icon_note] The resistor assembly is crimped or pressed together and further disassembly is not possible. | |
| [* red] Use a cotton bud and isopropyl alcohol to clean the surface of the resistive element. | |
| - | [* orange] Spray a plastic safe contact cleaner in the area of the feeler contacts. |
| + | [* orange] Spray a [[Topic:Pentax LX#Section_Supplies|plastic safe contact cleaner|new_window=true]] in the area of the feeler contacts. |
| [* yellow] Rotate the dial back and forth several times. | |
| [* green] Check the resistance between the purple wire and ground. It should range from 7.5 kΩ to 200 kΩ with no dead spots. |