5. Adımdaki Değişiklikler
Adım Satırları
| + | [title] Front Screws Part 2 |
|---|---|
| + | [* black] Now you need to remove these plastic coverings on the bottom of the drone. I recommend using a small allen key and inserting it into the screw hole as shown. You should be able to pop the plate off from underneath very easily. |
| + | [* black] Alternatively, you can try to use a plastic pry tool along the edges of the plate. However, I have found this method to be more difficult and far more likely to damage the plastic. |
| + | [* black] After removing the plates, unscrew and remove both of the screws indicated by the arrows. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi