10. Adımdaki Değişiklikler
Adım Satırları
| + | [title] De-solder the Arm |
|---|---|
| + | [* black] On the top of the drone, you should notice the 12 wires shown in the 1st image. These wires control the front right & left arms. You will need to de-solder the wires corresponding to the arm you are replacing. |
| + | [* black] The red line shown in the image separates the wires into two groups. The wires on the left, power the left arm; the wires on the right, power the right arm. |
| + | [* black] Once you de-solder the wires (and assuming you've disconnected the antenna cable), the arm should be completely removable. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi