4. Adımdaki Değişiklikler
Adım Satırları
| + | [* black] Using a plastic opening pick, partially peel up the top of the back rubber grip. |
|---|---|
| + | [* black] Carefully begin lifting the back cover up away from the camera body. |
| + | [* icon_caution] Do not lift it all the way off. There is still a ribbon cable attaching the back cover to the main PCB board. |
| + | [* red] Use a plastic spudger to gently pry off the ribbon cable. |
| + | [* orange] Use a plastic spudger to gently pry off the other cable connecting the back cover to the camera. |
| + | [* icon_note] The connector tab sticks out slightly on each end of the connector, which gives you a good spot to pry the connector off. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi