Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Now that the lower edge of the board is free from the outer case, rotate the logic board toward yourself to expose its rear face.
[* icon_cautionicon_note] The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components.
[* icon_cautionicon_note] The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components.
[* black] Carefully pull the optical drive connector away from its socket on the logic board.
[* icon_note] Pull the connector perpendicular to the face of the logic board.