Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

7. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] WithTo remove the screws removed, we have to get rid of this small metal plate. Removing this plate can be a bit tricky so don't get discouraged/frustrated.
[* black] At this point, we'll have to lift
plate, the logic board up to pullmust be removed from the plate outfront case.
[* black] WithTo remove the screws removed, we have to get rid of this small metal plate. Removing this plate can be a bit tricky so don't get discouraged/frustrated.
[* black] At this point, we'll have to lift
plate, the logic board up to pullmust be removed from the plate outfront case.
[* icon_caution] With one hand, gently slide the top left end of the board up and out of the device.
[* yellow] With your other hand, pull the plate out until the tab comes out of the device.
[* black] Once the tab is pulled out from the bottom, slide the metal plate down and out from the device.