Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: AmitP

Düzenleme onaylandı tarafından Jake Devincenzi

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Unscrew 8 T10 screws from the cooling unitunit. G5 models with the large Fujikura heat sinks (not shown in picture) will have 8 2.5mm hex screws.
[* icon_note] The screwscrews are somewhat hidden, so they cannot be see in the picture.
[* red] Unscrew 8 T10 screws from the cooling unitunit. G5 models with the large Fujikura heat sinks (not shown in picture) will have 8 2.5mm hex screws.
[* icon_note] The screwscrews are somewhat hidden, so they cannot be see in the picture.
[* icon_note] To visualize the location of the screws look 3 steps ahead.
[* black] The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.