Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Jake Devincenzi

Düzenleme onaylandı tarafından Jake Devincenzi

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Unscrew 8 T10 screws from the cooling unit. NOTE: these screws are acctually allen keys. The prefered tool will be long handled allen keys. t10 are 2.74mm (closest allen key is 2.5 or 3mm) and t15 are 3.27mm(closest allen key is 3mm and 4mm). You may strip your tool or the actual screws themselves. Use a set of high quality long handled allen keys.
[* icon_note] The screws are somewhat hidden, so they cannot be see in the picture.
[* icon_note] To visualize the location of the screws look 3 steps ahead.
[* black] The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.
[* black] AnotherThe last two images show another version of LCS(outthe LCS (out of the computer) in the G5 with off-center views to show the 8 screw holes.
[* black] AnotherThe last two images show another version of LCS(outthe LCS (out of the computer) in the G5 with off-center views to show the 8 screw holes.