1. Adımdaki Değişiklikler
Düzenleyen: Tim Ellison —
Düzenleme onaylandı tarafından Tim Ellison
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Removing the metal backplate. This is just stuck on with some |
|---|---|
| + | [* black] Removing the metal backplate is simple. This is just stuck on with some flexible glue. |
| [* black] Inside you can see a number of large cut outs in the rear of the plastic casing. | |
| [* red] Note the small pinhole in the metal backplate that aligns with the rubber sealed hole in the plastic casing - more on that later. | |
| - | [* yellow] There is also a very small ground area inside the metal backplate that appears to align with the |
| + | [* yellow] There is also a very small ground out area inside the metal backplate that appears to align with the rotating mass of the vibrator. |