iPhone 5s Logic Board Replacement 6 No'lu Adım Geçmişi

6. Adımdaki Değişiklikler

Düzenleyen: Jasper Fleischhauer — 5 Eki 2016

Düzenleme onaylandı tarafından Jasper Fleischhauer

	[* black] Remove the following screws from the logic board:
	[* red] One 2.4 mm Phillips #000 screw
-	[* icon_reminder] This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to [guide\|20246\|step 34\|stepid=72613\|new_window=true] to remove it.
+	[* icon_reminder] This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to [guide\|20246\|this step\|stepid=72613\|new_window=true] to remove it.
	[* orange] Two 2.3 mm Phillips #000 screws
	[* yellow] Four 2.8 mm standoff screws
	[* icon_note] Use a small flathead screwdriver to remove these standoff screws.
	[* icon_reminder] During reassembly, you can use the tip of a spudger to get the standoff screw started.