iPhone 5s Logic Board Replacement 6 No'lu Adım Geçmişi

6. Adımdaki Değişiklikler

Düzenleyen: Dominik Schnabelrauch — 5 Tem 2018

Düzenleme onaylandı tarafından Dominik Schnabelrauch

	[* black] Remove the following screws from the logic board:
	[* red] One 2.4 mm Phillips #000 screw
	[* icon_reminder] This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to [guide\|20246\|this step\|stepid=72613\|new_window=true] to remove it.
	[* orange] Two 2.3 mm Phillips #000 screws
	[* yellow] Four 2.8 mm standoff screws
-	[* icon_note] Standoff screws are best removed with a [product\|IF145-388-5\|standoff screwdriver\|new_window=true] or [product\|IF145-343\|standoff driver bit]. A small flathead screwdriver can also do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
+	[* icon_note] Standoff screws are best removed using an [product\|IF145-343\|new_window=true] and [product\|IF145-326\|driver handle\|new_window=true].
+	[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.