Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Nicolas Siemsen

Düzenleme onaylandı tarafından Nicolas Siemsen


Adım Satırları

+[* black] With the glass disconnected from the regulator and secured properly the regulator can now be removed.
+[* black] Start by removing the switch from the plug.
+[* black] Then use a flat blade screwdriver to pop the back of the plug off. This will reveal the individual connector ends inside the plug.
+[* black] Take a picture or make careful notes of where each wire goes. While the wires and the holes in the plug are typically numbered for easy reassembly it's better to be safe than sorry.

Resim 1

Önceki resim yok