Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Nicolas Siemsen

Düzenleme onaylandı tarafından Nicolas Siemsen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] To remove your motor mounts you will need to raise, and support, your engine with a bottle jack.
[* black] Before you can do this you will need to remove the bolts that hold the engine to the mounts. This is done from below the car.
[* green] The bolts are allen head bolts; you will need an 8mm allen head socket. It should be a 1/2 inch drive socket as you will want a large wrench for leverage. These are often in very tightly.
-[* red] The bolt on each mount is located up inside a recessed are as shown.
+[* red] The bolt on each mount is located up inside a recessed area as shown.
[* black] Remove the bolt and set it aside.