Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Elohino Theodore —

Düzenleme onaylandı tarafından Geoff Wacker

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the keyboard/***Open the screen up all the way to 180 degrees. The LCD screen should be laying flat as well as the keyboard.***
+[* black] Open the screen up all the way to 180 degrees. The LCD screen should be laying flat as well as the keyboard.
[* black] Use a flat head screwdriver to pry the D620 nameplate off from the right side edge.
-[* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining screws/***On the right and left sides of the nameplate gently lift it to show the 3 keyboard retaining screws.***
-[* red] Remove the 3 screws/***Remove the 3 screws with the screwdriver.***
+[* black] 'On the right and left sides of the nameplate gently lift it to show the 3 keyboard retaining screws.
+[* red] Remove the 3 screws with the screwdriver.