1. Adımdaki Değişiklikler
Düzenleyen: Elohino Theodore —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the keyboard |
|---|---|
| + | [* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the keyboard/***Open the screen up all the way to 180 degrees. The LCD screen should be laying flat as well as the keyboard.*** |
| [* black] Use a flat head screwdriver to pry the D620 nameplate off from the right side edge. | |
| - | [* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining screws |
| - | [* red] Remove the 3 screws |
| + | [* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining screws/***On the right and left sides of the nameplate gently lift it to show the 3 keyboard retaining screws.*** |
| + | [* red] Remove the 3 screws/***Remove the 3 screws with the screwdriver.*** |