Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Reed Crosby

Düzenleme onaylandı tarafından Reed Crosby

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Close the screen of the laptop completely.
-[* black] Make sure the cables do not get damaged by the LCD screen or the logic board.
-[* black] With a screwdriver, remove the two screws that are circled in the picture.
-[* green] The bottom screw is labeled with a "D".
+[title] LCD Screws
+[* black] Close the laptop screen completely, make sure it clips in place.
+ [* icon_caution] Make sure no cables or parts get caught in the hinge.
+[* green] The bottom screw is labeled with D, remove it.
+[* blue] The screw on the rear is not labeled, remove it as well.
+ [* icon_note] Rinse and repeat for both sides of the laptop.