Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

12. Adımdaki Değişiklikler

Düzenleyen: Cory Senecal

Düzenlenme reddedildi tarafından Andrew W.


Adım Satırları

[* black] Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:
[* red] Two 1.3 mm screws
[* orange] One 1.7 mm screw
[* yellow] One 3.25 mm screw
[* icon_caution] It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 3.25 mm screw or the 1.7 mm screw in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.
[* icon_caution] Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size, don't force them.
[* icon_note] On some phones, the 1.7mm screw is attached to the front panel assembly cable bracket.