Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Düzenleme onaylandı tarafından Walter Galan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] If you're installing a new front panel assembly, it may need the following preparation:
-[* black] Remove the small piece of adhesive backing from the digitizer cable.
+ [* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
+ [* orange] Remove the small piece of adhesive backing from the digitizer cable.