Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: lofkin

Düzenleme onaylandı tarafından lofkin

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] If you're installing a new front panel assembly, it may need the following preparation:
[* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
[* orange] Remove the small piece of adhesive backing from the digitizer cable.
+[* black] Make sure all copper is covered on the new repalcement screen as once fitted without this the screen will move randomly.